Powder coating service providers are usually asked many questions regarding the process by clients who need to make a decision regarding which finishing approach to work with. Most of the questions asked revolve around the benefits that powder coatings offer over liquid paints and other finishing methods. To understand what this process is all about, one has to start by understanding its definition. When one needs Powder Coating Surrey BC Offers the perfect location to visit.
Powder coating is a special kind of method where protective and decorative finish is applied to virtually any surface in existence. A powdery coating consisting of finely ground pigments and resin are used in this approach. A sprayer is then applied in dusting the coating onto the surface being coated. When the coating gets out of the nozzle, it is electrostatically charged. The process works when the substrate is electrically grounded.
After the substrate has been dusted with the coating, it is then placed inside an oven for it to undergo the curing process. This process heats and fuses the powder into a smooth coating over the substrate. The finish is not only smooth, but it is also durable, uniform, attractive, and of high quality. This method represents the fastest growing finishing technology in the whole of North America.
For quite a long duration now, this method has been in use. During 1950s is when the introduction was first done. However, people never used and explored it that much until the 1980s. This period is when it began to attain popularity. The process was meant for mass production processes and heavy industrial applications at the beginning. Enthusiasts, homeowners, and hobbyists gained access when the method began to gain popularity.
The method offers businesses, industries and consumers the best finishing option in terms of beauty, durability and efficiency. This process offers resistance to wear and tear and can be applied on any type of metal surface. One can also choose from a wide range of color options. There are different finishing options available too including iridescent, high gloss, hammer tone finishes, wrinkle, fluorescent, candies, glitter, flat, metallic, satin, clear and gloss finishes.
Solvent-based paints are cause a lot of pollution to the environment because they contain volatile organic compounds. These VOCs are emitted into the environment to cause a lot of air pollution. Since coatings do no contain solvents, they lack VOCs and so they do not cause pollution in the environment. This environmental friendliness makes this method very preferable.
Cost effectiveness is another major advantage that is associated with this method. Cost savings are achieved from this method because it is possible to buy powder that is just enough for the surface that needs to be painted with no excesses. Also, there is no need for catalysts and hardeners needed in this process. Surface preparation simply involves sandblasting and cleaning, which cuts down on cost further.
Surfaces and objects that are non-metal can also be coated. There are slight variations in this process from the procedures applied in coating metallic surfaces. Non-metallic objects must always be put into the oven for heating. While still hot, spaying is done. This allows the powder to melt slightly and adhere to the surface. After this, the object is placed back inside the oven to finish curing.
Powder coating is a special kind of method where protective and decorative finish is applied to virtually any surface in existence. A powdery coating consisting of finely ground pigments and resin are used in this approach. A sprayer is then applied in dusting the coating onto the surface being coated. When the coating gets out of the nozzle, it is electrostatically charged. The process works when the substrate is electrically grounded.
After the substrate has been dusted with the coating, it is then placed inside an oven for it to undergo the curing process. This process heats and fuses the powder into a smooth coating over the substrate. The finish is not only smooth, but it is also durable, uniform, attractive, and of high quality. This method represents the fastest growing finishing technology in the whole of North America.
For quite a long duration now, this method has been in use. During 1950s is when the introduction was first done. However, people never used and explored it that much until the 1980s. This period is when it began to attain popularity. The process was meant for mass production processes and heavy industrial applications at the beginning. Enthusiasts, homeowners, and hobbyists gained access when the method began to gain popularity.
The method offers businesses, industries and consumers the best finishing option in terms of beauty, durability and efficiency. This process offers resistance to wear and tear and can be applied on any type of metal surface. One can also choose from a wide range of color options. There are different finishing options available too including iridescent, high gloss, hammer tone finishes, wrinkle, fluorescent, candies, glitter, flat, metallic, satin, clear and gloss finishes.
Solvent-based paints are cause a lot of pollution to the environment because they contain volatile organic compounds. These VOCs are emitted into the environment to cause a lot of air pollution. Since coatings do no contain solvents, they lack VOCs and so they do not cause pollution in the environment. This environmental friendliness makes this method very preferable.
Cost effectiveness is another major advantage that is associated with this method. Cost savings are achieved from this method because it is possible to buy powder that is just enough for the surface that needs to be painted with no excesses. Also, there is no need for catalysts and hardeners needed in this process. Surface preparation simply involves sandblasting and cleaning, which cuts down on cost further.
Surfaces and objects that are non-metal can also be coated. There are slight variations in this process from the procedures applied in coating metallic surfaces. Non-metallic objects must always be put into the oven for heating. While still hot, spaying is done. This allows the powder to melt slightly and adhere to the surface. After this, the object is placed back inside the oven to finish curing.
About the Author:
When you are looking for information about powder coating Surrey BC residents can come to our web pages today. More details are available at http://www.davescoating.com now.
No comments:
Post a Comment